Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Great Neck?
Spring repair in Great Neck typically costs $180 – $340 for a single spring, and a matched pair runs about twice that because the two springs are almost always replaced together. Most residential jobs land near the middle of that range once you account for the door’s weight and the spring type already on the door. The written estimate you get before any work begins sets the final price, so the number you approve is the number that applies.
We’re Great Neck Garage Door Repair Pros, and springs are the part of the door we spend the most time on. A broken spring takes a working door and turns it into a dead weight in about a second, and it usually happens without warning, often first thing in the morning when you’re trying to leave. If that’s where you are right now, call (877) 792-6350 and we’ll get you a free estimate and a same-day appointment when the schedule allows.
Key Takeaways
- One torsion or extension spring: typically $180 – $340 in the Great Neck area.
- A matched pair, which is the usual replacement: roughly double that range.
- Spring work is high-tension work. It is not a safe DIY repair, and we treat it as a trained, safety-critical service.
- Free estimates, upfront pricing, and same-day service on urgent failures.
- We work on the door you already have, across eight major brands including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
Spring Replacement Cost Breakdown (2026)
These are the typical estimated ranges we quote for Great Neck work in 2026. Your written estimate is what counts, and it’s free.
| Service | Typical Est. Range |
|---|---|
| Spring repair or replacement (one spring) | $180 – $340 |
| Matched pair of springs (typical replacement) | About twice the single-spring range |
| Garage door repair (general) | $150 – $600 |
| Cable repair | $130 – $250 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| New door installation | $700 – $2200 |
What pushes a spring job toward the top of the range? Torsion springs (the ones mounted on a shaft above the door) generally cost more than extension springs (the ones that run along the tracks on either side), and a two-car door carries heavier springs than a single-car door, so the hardware itself costs more. If a spring failure has also stretched a cable or knocked a track out of line, that work is quoted separately. What keeps a job at the low end is a straightforward single-spring swap on a standard door with everything else in good shape. Either way, the estimate is free and the price is settled before we touch the door.
What Affects Spring Replacement Pricing in Great Neck
A spring is not a one-size part. The correct spring is matched to the weight of your specific door, and a few local variables move the price up or down.
- Spring type. Torsion springs sit on a shaft above the door and carry more of the load; extension springs run beside the tracks. Torsion replacement usually runs higher because the hardware and the labor are both heavier, and older Great Neck homes are more likely to have extension setups that predate the torsion standard.
- Door weight and width. A two-car door needs heavier springs than a single-car door, and the hardware costs more as a result. We match the spring to the actual door weight rather than guessing, because an undersized spring fails early and an oversized one strains the opener.
- Whether one or both springs are replaced. Springs usually come as a matched pair, and replacing only the broken one means the older spring typically fails soon after. We replace them as a pair unless there’s a specific reason not to, and we’ll explain the trade-off so you can decide.
- Related wear found during the job. A snapped spring often takes a cable with it, or leaves a roller or track out of line. Cable repair runs $130 – $250 and track realignment $120 – $240, and it makes sense to handle those in the same visit rather than paying for a second trip.
- Door condition and age. A door that’s been out of balance for a while wears its springs harder. If the door itself is showing panel damage ($250 – $500 to replace a panel) or the opener is straining ($120 – $320 for opener repair), we’ll flag it in the same estimate so there are no surprises later.
- Access and setup. A tight single-car garage, a low-clearance ceiling, or a door with an unusual track configuration can add labor time. We check the setup before quoting so the estimate reflects the real job.
How to Save on Spring Replacement
There’s no coupon code for a spring job, but there are a few practical ways to keep the total down.
- Replace the pair, not just the broken spring. Paying twice for two separate visits costs more than doing both springs in one trip, and you avoid a second failure a few months down the road.
- Bundle related wear in one visit. If a cable, roller, or track is also worn, handle it in the same appointment instead of scheduling a second call.
- Get the free estimate first. An upfront written estimate tells you exactly what’s needed before anyone starts, and it’s free. Call (877) 792-6350 to set one up.
- Don’t let a small issue grow. A door that’s out of balance or noisy is a warning sign. Catching it before the spring snaps usually costs less than an emergency call on a door that won’t open at all.
- Ask about the door’s overall condition. If the door is near the end of its life, compare spring repair against a new door ($700 – $2200 installed) rather than sinking money into a door that needs replacing soon anyway.
Can You Replace a Spring Yourself?
No. High-tension torsion and extension springs store enough force to cause serious injury, and this is one of the most dangerous DIY projects a homeowner can attempt. A torsion spring under load can release suddenly, and the tools and technique required to wind and unwind it safely aren’t things most people have on hand. We handle spring work as a core, trained service rather than an add-on, and our technicians have up to 15 years of experience with exactly this kind of hardware. What you can safely do is check the door by hand: if it feels heavy, won’t stay halfway up, or you hear a loud bang from the garage, stop using it and call a trained technician.
Why Choose a Garage Door Specialist in Great Neck?
Springs are a small part with a big job, and they’re matched to the door they’re on. A generalist who also does doors as a side job is working from a different playbook than a team whose entire focus is garage doors. We work only on garage doors, from routine opener diagnostics to full installations, so every technician, tool, and part is specific to the trade.
That matters most on brand-specific jobs. We’re certified across eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. If your door or opener carries one of those names, we arrive already familiar with the hardware on your home, which cuts down on guesswork and second visits. For a closer look at the full service, see our guide to spring replacement.
We’re also available for emergency service when a door is stuck open, stuck down, or won’t close. A door that won’t close leaves the garage and everything in it exposed, so we treat those calls as urgent. Same-day service is available when the schedule allows, and dispatch runs 7am to 7pm.
Frequently Asked Questions
How much does spring replacement cost in Great Neck?
Spring replacement in Great Neck typically costs $180 – $340 for one spring, and a matched pair runs about twice that. A typical job lands near the middle of the single-spring range once the door weight and spring type are factored in. Call (877) 792-6350 for an exact quote, since estimates are free.
Is it cheaper to repair or replace a garage door spring?
Repairing (replacing) the spring is almost always cheaper than replacing the whole door, which runs $700 – $2200 installed. A new spring is the right call unless the door itself is failing at the panels, tracks, or hardware, in which case a full replacement may cost less over time. Call (877) 792-6350 and we’ll give you an honest comparison in a free estimate.
Can you come today if my spring is broken?
Yes, same-day service is available when the schedule allows, and dispatch runs from 7am to 7pm. A broken spring leaves the door stuck or dangerous to operate, so we prioritize those calls. Call (877) 792-6350 for the earliest available appointment and a free estimate.
Why do both springs usually get replaced at once?
Because a pair is installed together and wears together, so replacing only the broken one usually means the older spring fails soon after. The pair costs about twice the single-spring range, but replacing them together costs less than two separate visits. Call (877) 792-6350 for a free estimate on a matched pair.
Do you service my brand of door or opener?
Yes, we service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so there’s a good chance we already know your hardware. Call (877) 792-6350 to confirm your model and get a free estimate.
What happens if I keep using a door with a broken spring?
Don’t. A door with a broken spring puts the entire load on the opener and cables, which can cause further damage and is dangerous if the door comes down unexpectedly. Stop using it and call (877) 792-6350 for a free estimate and same-day service when available.
Call for a Free Spring Replacement Estimate in Great Neck
If your garage door won’t lift, you heard a loud snap, or the door feels heavier than it should, that’s a spring problem, and it’s not one to test by hand. We’ll give you a free, upfront estimate, a clear range before any work starts, and same-day service when the schedule allows. Estimates are free and the written estimate sets the final price. Call (877) 792-6350 today, and one call covers everything your garage door needs.
Pricing reflects the Great Neck market as of 2026. Great Neck Garage Door Repair Pros offers free estimates – call (877) 792-6350.
Written by the team at Great Neck Garage Door Repair Pros.
What Our Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Divya Gupta"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Brianna Ellison"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Amit Sharma